Aerosol Cleaning Instructions

Aerosol All-in-One Cleaning Instructions

1. Make sure the firearm is cleared and made safe prior to maintenance.
2. Shake can well.
3. Spray onto firearm maintenance accessories such as bore brushes, patches, Battle Ropes™, and on gun parts as per your firearms maintenance manual.
4. Use saturated accessories to clean and maintain your firearm as instruction by the firearms maintenance manual.
5. Wipe clean with a microfiber towel.

Aerosol Dry Lube w/ PTFE Instructions

1. Make sure the firearm is cleared and made safe prior to maintenance.
2. Clean surface of grease and grime with Breakthrough Clean Technologies® Military-Grade Solvent.
3. Shake can well.
4. Spray evenly on desired surface.
5. Re-apply as needed.

NOTE: This product contains acetone, so it may damage the paint, stain, and/or varnish on your stock. Please test in a small, inconspicuous area prior to use.

Aerosol Military-Grade Solvent Instructions:

1. Make sure the firearm is cleared and made safe prior to maintenance.
2. Shake can well.
3. Spray onto firearm maintenance accessories such as bore brushes, patches, Battle Ropes™, and on gun parts as per your firearms maintenance manual.
4. Allow to soak for 1 minute.
5. Use saturated accessories to clean and maintain your firearm as instruction by the firearms maintenance manual.
6. Dry with microfiber cloth.
7. Lubricate, condition and protect your firearm with Battle Born™ lubricants.

Aerosol Foaming Bore Cleaner Instructions:

1. Make sure the firearm is cleared and made safe prior to maintenance.
2. Shake can well.
3. Spray into the bore of the firearm from the breech of the barrel until you see the foaming bore cleaner come out of the muzzle.
4. Allow to soak for 1 minute.
5. Use your firearm maintenance accessories such as the bore brushes, patches, Battle Ropes™, etc. to clean the bore of your firearm as per the instructions in the maintenance manual.
6. Lubricate, condition and protect your firearm with Battle Born™ lubricants.