Ultrasonic Cleaner Usage Instructions:

BEFORE CLEANING, ALWAYS MAKE SURE THE FIREARM IS UNLOADED. DO NOT SOAK FIREARM OR PARTS OVERNIGHT IN THIS SOLUTION. 

Suggested dilution ratio for concentrate is 1:5 (1 part solution, 5 parts water). 

1. Disassemble the firearm according to manufacturers’ instructions. 
2. If you observe loose contaminants remove them with a brush, wipe or other tool. 
3. Once the parts are submerged, set your cleaner to the time and temperature (if applicable) to the manufacturers recommended settings. Cleaning times can vary, but the shortest effective cleaning cycle is recommended. 5 – 15 min is a typical duration. 
4. When cleaning cycle is complete remove parts and rinse with warm water. 
5. Dry thoroughly. Use compressed air if available to displace moisture. 
6. Relubricate and protect moving parts with a protective coating of Breakthrough Clean Technologies® Battle Born High-Purity Oil, HP Pro or Battle Born Grease to the cleaned parts to prevent corrosion during storage.